top of page
Technical Specifications
XL Insertion Rail -
30, 33, 35, 40, 46mm
Aluminum-6005A T61 Mill Finish
Size | Weight | Yield Strength (Ksi) | Minimun Ultimate Tensile Strength (Ksi) | Moment of Inertia lx (in^4) | Moment of Inertia ly (in^4) | Modulus of Elasticity (Ksi) | Minimum Section Modulus Sx (in^3) |
|---|---|---|---|---|---|---|---|
30mm | 1.648 | 35 | 38 | 2.457 | 1.223 | 10100 | 1.199 |
33mm | 1.592 | 33 | 38 | 2.411 | 1.201 | 10100 | 1.154 |
35mm | 1.606 | 35 | 38 | 2.521 | 1.201 | 10100 | 1.177 |
40mm | 1.634 | 35 | 38 | 2.802 | 1.205 | 10100 | 1.237 |
46mm | 1.680 | 35 | 38 | 3.175 | 1.213 | 10100 | 1.314 |
Base Rail - XXL
Aluminum-6005A T61 Mill & Black Finish
Size | Weight (lb/ft) | Yield Strength (Ksi) | Minimum Ultimate Tensile Strength (Ksi) | Modulus of Elasticity (Ksi) | Moment of Inertia lx (in^4) | Moment of Inertia ly (in^4) | Minimum Section Modulus Sx (in^3) |
|---|---|---|---|---|---|---|---|
XXL | 2.073 | 35 | 38 | 10100 | 5.66 | 1.72 | 2.36 |
Retaining Clip - HD
Aluminum-6005A T61 -HD
Product | Weight (oz) | Yield Strength (Ksi) | Ultimate Tensile Strength (Ksi) | Maximum Holding Force (ft/lbs) | Length (in) | Mounting Hole Diameter (in) |
|---|---|---|---|---|---|---|
HD | 1.45 | 35 | 38 | 915 | 2.5 | 3/8 |
Ground Shark 1.0
(Ground Clip 1.0)
Certification Standards | ETL listed to UL
467 Ed. 9, dated
September 21, 2007
UL tested to Subject 2703
Standard for Safety for Grounding and Bonding Equipment
Control #4003859 |
Testing Lab | Underwriters Laboratories
-
For UL2703
Report Number
QIMS E357798 |
Set Includes | 1 - 3/8 x 3/4" Green Hex Bolt SS, 1 - 3/8" Washer, SS, 1 - Upper Ground Clip, SS, 1 - Lower Ground Clip, SS, 1 - STD Slot Nut, SS |
Wire Size Accepted | Either AWG #6 or AWG #10
AWG Solid bare copper conductors |
Test Performed | Bond Path
Resistance test,
Temperature Cycling
Test (TC200),
Humidity Freezing
Test (HF10), Bonding Conductor Test, Pull and Secureness Test |
Torque Value (ft/lbs) | 20 |
Application | Bonds bare copper wire (EGC) to Creotecc
Mounting System, also serves as primary system connection of mounting system to system ground and/ or grounding electrode conductor (GEC). |
Pile Bracket Set
Product | Material | Yield Strength (Ksi) | Ultimate Tensile Strength (Ksi) | Modulus of Elasticity (Ksi) | Weight (lbs) | Set Includes | Torque Value (ft/lbs) |
|---|---|---|---|---|---|---|---|
Pile Bracket Set - STD | A36 Steel, Powder Coat with Zinc Undercoat | 36 | 58 | 29000 | 1.324 | (1) Pile Bracket, Powder Coated Steel — (2) 3/8 × 3/4" Hex Bolt F593A, SS — (2) 3/8" Split Lock Washers, AL — (2) STD Slot Nuts, SS | 25 |
Piles I Beam/ C Channel
Style | Weight (lb/ft) | Standard Lengths (ft) | Yield Strength (Ksi) | Minimum Ultimate Tensile Strength (Ksi) | Modulus of Elasticity (Ksi) | Moment of Inertia lx (in^4) | Moment of Inertia ly (in^4) | Galvanization Level | Minimum Section Modulus Sx (in^4) |
|---|---|---|---|---|---|---|---|---|---|
C Channel | 5.5 | 8,'9',10',11',12',13',14' | 50 | 65 | 29000 | 6.393 | 2.019 | G235 | 2.56 |
I Beam | 7 | 8',9',10',11',12',13',14',16' | 55 | 65 | 29000 | 12.131 | 1.584 | Hot Dipped
(Equivalent - 6340) | 4.22 |
Splices
Aluminum - 6005A T61 XL 18" - Mill Finish
Size | Weight (lb/ft) | Length (in) | Allowable Locations | Yield Strength (Ksi) | Minimum Ultimate Tensile Strength (Ksi) | Modulus of Elasticity (Ksi) | Moment of Inertia lx (in^4) | Moment of Inertia ly (in^4) | Minimum Section Modulus Sx (in^3) |
|---|---|---|---|---|---|---|---|---|---|
XL 18" | 1.483 | 18" | Anywhere in middle 80% of span | 35 | 38 | 10100 | .863 | .552 | .781 |
bottom of page